MQTT Topics
Home Buttons uses MQTT to communicate with you smart home.
Here is a list of topics that are used by the device:
| Topic | Description | Retained |
|---|---|---|
| {BASE_TOPIC}/{DEVICE_NAME}/button_{1-6} | When button {1-6} is pressed, "PRESS is published to this topic. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/button_{1-6}_double | When button {1-6} is pressed 2 times, "PRESS is published to this topic. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/button_{1-6}_triple | When button {1-6} is pressed 3 times, "PRESS is published to this topic. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/button_{1-6}_quad | When button {1-6} is pressed 4 times, "PRESS is published to this topic. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/temperature | Temperature in °C or °F, depending on the setup choice. Published on button press and every N minutes, specified by Sensor Interval. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/humidity | Relative humidity in %. Published on button press and every N minutes, specified by Sensor Interval. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/battery | Battery charge in %. Published on button press and every N minutes, specified by Sensor Interval. | No |
| {BASE_TOPIC}/{DEVICE_NAME}/btn_{1-6}_label | Current label of button {1-6}. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/sensor_interval | Current sensor publish interval in minutes. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/awake_mode | Current state of Awake mode | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/awake_mode/availability | Indicates when Awake mode is available (available only when DC power source is connected). "online" or "offline" | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/cmd/btn_{1-6}_label | Command to change label of button {1-6} to new value. Topic cleared by device when received. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/cmd/sensor_interval | Command to change sensor publish interval. 1 - 30 minutes. Topic cleared by device when received. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/cmd/awake_mode | Command to change Awake mode setting. "ON" or "OFF. Topic cleared by device when received. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/cmd/disp_msg | Display a custom message on device. Topic cleared by device when received. | Yes |
| {BASE_TOPIC}/{DEVICE_NAME}/cmd/schedule_wakeup | Schedule next wakeup. Value in seconds. Topic cleared by device when received. | Yes |
- {BASE_TOPIC} - Configured during setup. Default is homebuttons.
- {DEVICE_NAME} - Name of device as configured during setup and shown in Home Assistant