Home Buttons
Features:
- 6 push buttons, multiple press support
- 2.9" e-paper display
- Text labels and Material Design Icons
- Wi-Fi connectivity
- Less than 1 second from button press to triggered action (depending on your network)
- Temperature & humidity sensor
- Power options: 18650 Li-Ion Battery Cell, USB-C, 5V DC
- Greater than 1 year battery life
- USB-C charging
- Compact size: 87 x 87 x 23 mm
Getting Started
Set up you device with the help of Getting Started guide.
Where To Get
You can buy Home Buttons on Tindie or Lectronz.
Technical Specifications
Physical
- Width: 86.5 mm
- Height: 86.5 mm
- Depth: 22.8 mm
- Weight: 140 g (incl. battery)
- Casing material: PETG (3D printed)
User Interface
- E-paper display
- 6 tactile buttons with LED illumination
Display
- Type: Single color E-paper (non-illuminated)
- Size: 2.9"
- Resolution: 296 x 128
- Model number: Good Display GDEY029T94
Connectivity
- 2.4Ghz WiFi
- MQTT protocol (Supports MQTT Discovery)
- USB Type-C connector
- Charging
- Firmware update (USB DFU mode)
- Debug messages (USB CDC mode)
SoC
- ESP32-S2
- Xtensa® SingleCore 32bit LX7
- Integrated WiFi modem: IEEE 802.11 b/g/n (2.4 GHz WiFi)
- Supports OTA (Over-The-Air firmware update)
- Native USB for firmware update and debug
- Advanced security features
Environmental Sensor
- Sensirion SHTC3 high accuracy Temperature and Relative Humidity sensor
- Temperature accuracy: ±0.2°C (0°C to 60°C)
- Humidity accuracy: ±2% RH (20% RH to 80% RH)
Battery
- 3.7 V Lithium-Ion 18650 battery cell (non-protected) is required
- WARNING: maximum cell length is 65.5 mm. Button top cells might not fit properly
- Expected battery life: 18 months
- Assuming Panasonic NCR18650B 3400mAh or equivalent
- Battery safety features:
- Reverse polarity protection
- Over-discharge protection
- Over-charge protection
- Overload protection
Charging at extreme temperatures (below 0°C or above 50°C) is not recommended. Check your battery specifications for more information
Charging
- Any standard USB Type-C power supply is sufficient for charging
Can also be charged using any computer USB port
- Battery charging current: 780 mA
Make sure the selected battery can be safely charged at this rate
- Expected recharging time from empty: 4 hours
Assuming Panasonic NCR18650B 3400 mAh or equivalent